Pay Heed to These Tips and Tricks When Replacing Ink Cartridges

Printer cartridges bear ink sensors, normally in the form of an IC chip. These sensors allow your computer to get acquainted with the ink levels of each and every cartridge, commanding your computer system to warn you when you are running out of ink. When this warning message notifies you, it’s high time to replace your cartridge correctly so as not to tamper with the functionality of your printer. Here are some tips and tricks to consider when you are replacing your ink cartridges.

  1. Make the use of the control panel of your printer to ascertain which cartridges need to be replaced. Regularly inspect the status monitor so that you don’t face the ink shortage. There is nothing more frustrating than requiring to print a document urgently only to find that you have run out of ink. The control panel also bears instructions that are specific to your printer model.
  2. Leave the old cartridges in your printer until and unless you are replacing them with the new ones. The ink left in the ink nozzles may dry out and harden itself when left exposed.
  3. Always use the genuine and bona fide parts. Get acquainted with the printer model and use the cartridges made particularly for that model to make sure that your printer is optimally functioning. Once you are aware of what cartridges you want to buy, you can search the extensive list of cartridges and HP ink at 123ink.ca.
  4. Replacement is always a better idea than it is to refill. It is always a good idea to use the original and bona fide manufactured parts than to try and recycle them by your own means. Mistakes tend to ruin the cartridge and deteriorate your printer system.
  5. Shield the ink supply area of the ink cartridge against the dust and dirt. This is another reason to why you should never leave them exposed and preserve the old cartridges in the printer until you replace them.
  6. Always be careful when it comes to removing the used cartridges from your printer because there might be some ink remaining in the areas that surround the supply port. Apart from being messy, there are many chemicals contained in the ink that can cause skin irritation and there is always the risk present of getting the ink into your eyes.